Accessories

Fuse 6x32mm, 10kA/1000V for e.g. Elma BM2805

Test lead for the most demanding measurement tasks.

With a cross-section of 2.5 mm² and an outer jacket made of silicone, this test lead is both flexible and robust, while the length of 200 cm is sufficient for most measurement tasks.

Safety category CAT IV 1000 V.

Test lead for the most demanding measurement tasks.

With a cross-section of 2.5 mm² and an outer jacket made of silicone, this test lead is both flexible and robust, while the length of 200 cm is sufficient for most measurement tasks.

Safety category CAT IV 1000 V.

Test lead for the most demanding measurement tasks.

With a cross-section of 2.5 mm² and an outer jacket made of silicone, this test lead is both flexible and robust, while the length of 200 cm is sufficient for most measurement tasks.

Safety category CAT IV 1000 V.

Test lead for the most demanding measurement tasks.

With a cross-section of 2.5 mm² and an outer jacket made of silicone, this test lead is both flexible and robust, while the length of 200 cm is sufficient for most measurement tasks.

Safety category CAT IV 1000 V.

PVF2317 is a test lead specifically designed for measurements on solar circuits and can be used to measure open-circuit voltage, short-circuit current, and insulation resistance.

To facilitate connection and disconnection, the MC4 connector is without a locking mechanism.

PVF2317 is robustly constructed with a 2.5 mm² cross-section and categorized as CAT III 1500 V/CAT IV 1000 V.

PVM2317 is a test lead specifically designed for measurements on solar circuits and can be used to measure open-circuit voltage, short-circuit current, and insulation resistance.

PVM2317 is robustly constructed with a 2.5 mm² cross-section and categorized as CAT III 1500 V/CAT IV 1000 V.

LoggerFlex offers a range of advanced data collection and monitoring solutions designed to meet the needs of various industries.

LoggerFlex FLDEX3 Extension Cable for Leak Detection, 3 m.

Certain members of LoggerFlex's BLOCK Datalogger family feature a dedicated port for connecting a leak detection sensor. The fully length-sensitive leak detection cable can be extended up to 100 meters, providing extensive coverage.

The LoggerFlex FLDEX3 is an extension cable designed to expand the LoggerFlex FLDKT3 Flood Detector Kit.

PVFM2317 is a test lead specially designed for performance measurements on the DC side of solar power systems.

The MC4 connectors allow the cable to be inserted into the DC circuit, e.g., between the panel and the inverter, enabling measurement of operating current with a clampmeter, while the banana plug provides access to voltage measurement.

PVFM2317 is robustly constructed with a 2.5 mm² cross-section and categorized as CAT III 1500 V/CAT IV 1000 V.

PVMF2317 is a test lead specially designed for performance measurements on the DC side of solar power systems.

The MC4 connectors allow the cable to be inserted into the DC circuit, e.g., between the panel and the inverter, enabling measurement of operating current with a clampmeter, while the banana plug provides access to voltage measurement.

PVMF2317 is robustly constructed with a 2.5 mm² cross-section and categorized as CAT III 1500 V/CAT IV 1000 V.

With a strong focus on innovation and creativity, LoggerFlex is dedicated to delivering groundbreaking IoT solutions that meet the highest standards across various industries, including pharmaceutical, food production, agriculture, HVAC systems, and building management.

In the event of a flood, LoggerFlex's flood sensor, combined with a BLOCK datalogger, not only triggers visible and audible alarms but also immediately sends alerts via calls, SMS, and email to an unlimited number of recipients. Advanced algorithms intelligently filter out false alarms caused by routine activities such as mopping, ensuring reliability and minimizing unnecessary disruptions.

LoggerFlex FLDKT3 Flood Sensor Starter Kit.

Certain members of LoggerFlex’s BLOCK Datalogger family are equipped with a dedicated port for connecting a leak detection sensor. The fully length-sensitive leak detection cable can be extended up to 100 meters, providing comprehensive coverage.

The LoggerFlex FLDKT3 Flood Sensor Starter Kit can be expanded with the LoggerFlex FLDEX3 Leak Detection Extension Cable.

Elma tripod/camera stand in aluminum with adjustable height 46-160 cm, suitable for use as a stand for devices such as cross and rotary lasers, distance meters, and other equipment with a standard 1/4-inch thread.

Delivered in a nylon bag with a tilt head.

Glycerin filling of analogue manometers for stabilization of pointers and pressure compensation. Used as needed. Must be ordered together with pressure gauges for filling in the Elma service center before dispatch.

Caps CAT IV, 2 pcs. pack

Test tip 4mm, 2 pcs. pack